The professional lens polishing pad is used to remove oxidation from the lens before applying Wipe New®. What is the purpose of the Professional Lens Polishing Pad? Do not allow treated lenses to come in contact with direct moisture (rain, dew, etc) for 24 hours. The headlights will dry to the touch in about 1 hour. When finished, set the applicator cloth in a location out of the reach of children and allow it to dry completely prior to discarding (a few hours). If treating multiple lenses, do so before the Wipe-It® dries out.Ħ. Tear open the Wipe-It® packet, (Do not open Wipe-It packet with teeth) pull out the applicator cloth and carefully wipe the lens ONE TIME, being careful not to get any Wipe New® onto the surrounding paint. Put on the nitrile gloves, ensure that you are in a well ventilated area and that the headlight lenses are completely dry. Ensure all lenses are 100% dry prior to proceeding to step 5.ĥ.

Repeat steps 1-4 on the all headlights, so that both are prepped and ready at the same time to apply Wipe New®. When you can see through the lens while wet, you are ready to apply Wipe New®. If not, repeat steps 2 and 3 on any missed spots. Dry the lens thoroughly with the included microfiber towel and inspect the surface to ensure oxidation has been removed. Re-wet the headlight lens and use the gray side of the Lens Polishing Pad to further polish the headlight lens.Ĥ. IMPORTANT: Do not allow the Polishing Pad to come into contact with painted surfaces as it may scratch these surfaces.ģ.

The oxidation coming off the lens will appear as a brownish colored liquid continue to rub until this visual indicator is no longer present. Ensure the lens remains wet while using the lens polishing pad.

Wet the headlight lens with water and use the green side of the Lens Polishing Pad to wet sand the headlight lens and remove oxidation. If the lens is cloudy/hazy when wet, proceed to step 2.Ģ. Simply wash the lens with soap and water, rinse, and proceed to step 4. If the lens appears crystal clear when wet (and hazy only when dry), then you do not need to use the Lens Polishing Pad. The way the lens looks when wet is the way it will appear once treated with Wipe New®. To determine whether you need to use the Professional Lens Polishing Pad, pour water onto your headlight lens.

Wipe new professional